Nice though the A400M is, I would suggest the following improvements:
The speedbrakes/slats whatever seem to offer very limited slowing-down capabilities.
in a400m-yasim.xml (around lines 90-91 they are set to
<mstab x="5.86" y="1.2" z="2.29"
chord="1"
length="1"
which is pretty small to try to slow down an aircraft of this size. More realistic might be:
<mstab x="5.86" y="1.2" z="2.29"
chord="0.83"
length="7.4"
That should help slow it down enough to land in a steep approach (100 kts with full flap? Maybe even less).
Once down, reverse thrust would be nice - especially on a small airfield.
The existing a400m/Nasal/keyboard.xml calls
<script>reversethrust.togglereverser()</script>
which is defined by a400m/Nasal/reverse-thrust.nas
and this appears to be a jsbsim routine for vectoring the engines through 180 deg.
But a400m-yasim.xml uses two thrusters to achieve this operation:
<!-- trusters for reverse -->
<thruster x="3.764" y="4.929" z="3.307"
vx="-1" vy="0" vz="0"
thrust="15000">
<control-input axis="/controls/engines/engine[0]/reverser" control="THROTTLE" src0="0" src1="1" dst0="0" dst1="1"/>
</thruster>
<thruster x="3.764" y="-4.929" z="3.307"
vx="-1" vy="0" vz="0"
thrust="15000">
<control-input axis="/controls/engines/engine[0]/reverser" control="THROTTLE" src0="0" src1="1" dst0="0" dst1="1"/>
</thruster>
Note that their power outputs are both controlled by "THROTTLE" (ie: "/controls/engines/engine[0]/throttle" )
which makes it a bit tricky potentially, because the throttle typically controls all four engines.
Anyway, something like this works for me as a keyboard <script>:
if(getprop("/controls/engines/engine[0]/reverser") == 1){
setprop("/controls/engines/engine[0]/reverser", 0);
setprop("/controls/engines/engine[0]/throttle", 0.0);
setprop("/controls/engines/engine[1]/throttle", 0.0);
setprop("/controls/engines/engine[2]/throttle", 0.0);
setprop("/controls/engines/engine[3]/throttle", 0.0);
}
else{
setprop("/controls/engines/engine[0]/reverser", 1);
setprop("/controls/engines/engine[0]/throttle", 1.0);
setprop("/controls/engines/engine[1]/throttle", 0.0);
setprop("/controls/engines/engine[2]/throttle", 0.0);
setprop("/controls/engines/engine[3]/throttle", 0.0);
}
A good test of whether it is ok is landing at ENRA rwy 32 and being able to turn off right at the ramp exit.