Here is one of My MK1A's with the exact mask used on the Folland Gnat, the P4. This is exactly what Gnat aircrew would have used untii the early 70's.
The Mk1A is worn over an inner communication helmet, either the type F or type G (both very similar).
The thin cable form the mask should be plugged ito the inner cloth communications helmet (type G) but is laying down in this image.

The Mk1A helmets were usually painted silver, but some squadrons painted them up to match their aircraft.
The P4 mask is unusual, and requires a change of cable in the helmet too. The oxygen connector also carries the communications plug, all in one. The green strip on this oxygen hose is a piece of extra rubber glued on, under the rubber are tiny wires, two per side, one pair for the microphone the other pair for the speakers. The thin wire to the helmet (laying down in the image) connects the mask to the headphones by what is in other aircraft the microphone connector, but in the gnat is a headphone connector.
(For other aircraft the helmet has a "pigtail" down-lead terminating in a NATO plug, so the mask mic is connected to the helmet's wiring harness.)
More info: https://scottbouch.com/aircrew-uk-oxygen-mask-p4-type.htm
And the seat side: https://scottbouch.com/aircrew-uk-personal-equipment-connector-mask-combined-oxy-mic-tel.htm