I have removed the textures to simplify things, colouring the moving bits as working on each one in turn then return to white when working.
To date rudder, elevator, ailerons working correctly but hit problems with the flaps, tried both methods (port x1-x2 for the axis and axis/centre on starboard flap) and getting lost with the values to use i.e. xyz in ac3d is not the same in the xml file.
You can see right flap nearly correct but the left total screw up. I know the canopy still to do, it rotates and not sliding, located a Harrier which works in similar manor to the JP and I am going to copy the method and see if it works. The rudder, elevator and ailerons did not take much to get working.
This my aircraft
https://drive.google.com/file/d/1nD4s5l7OLzYTshIJTzoNit1lfrnU4xnp/view?usp=sharing
Been gathering gauges and modeling the panel (been testing gauges out on the vampire as nothering appears in the JP).
I tried using the code for the Gloster Meteror with this model as a test so far. The Gloster cockpit as recently appeared in front and to the side of the nose.
If you could have a look and see what I am doing wrong.
PS the model is ex FSX converted to AC3D and still has alot of nodes/children etc been merging them as a go to get a simpler model tree as FGUK aircraft.
Oly2b